![]() If you need to remove it, use a flathead screwdriver to depress the Security Tab while detaching the Cover Plate: In addition to the optional Security Screw, the Security Tab helps to secure the Cover Plate after installation. Used to connect a client device to the LAN. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.ġ0/100/1000 Ethernet port supports data only.Restart Press and release the Reset button quickly.The Reset button serves two functions for the UAP-AC-IW-PRO: Note: To power and connect an 802.3af device to the LAN, you must use 802.3at PoE+ input. The maximum PoE passthrough output is 12W. You have the option to use the included Torx (shown) or Phillips Security Screw.ġ0/100/1000 Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). (Optional) The Security Screw secures the Cover Plate after installation. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server. The UAP-AC-IW-PRO itself requires 10W.Ĩ02.3at PoE+ input is required to use PoE passthrough. PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. IMPORTANT: UniFi Network Application v5.4 is recommended for managing the UAP-AC-IW-PRO and is available for download at: ui.com/download/unifi ![]() UniFi Network Application v5.4 or newer (available at: ui.com/download/unifi).Web Browser: Google Chrome (Other browsers may have limited functionality.).Java Runtime Environment 1.6 (1.8 or newer recommended).Linux, Mac OS X, or Microsoft Windows 7/8/10.Passive PoE adapters are not recommended. IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. T10 Security Torx bit (for Security Torx Screw option).Category 5 (or above) UTP cabling approved for indoor use.The diagram below illustrates the areas vulnerable to ESD attacks in a network.īy using a grounded Ubiquiti Power over Ethernet (PoE) Adapter along with Ubiquiti TOUGHCable and TOUGHCable Connectors, you can effectively protect against ESD attacks. ESD attacks are the leading cause for device failures. The standard TOUGHCable Connectors are available in a box of 100, while the TC-GND versions include ground wires and are available in a box of 20. Specifically designed for use with Ubiquiti TOUGHCable, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage, while allowing rapid field deployment without soldering. Available in lengths of 1000 ft (304.8 m).26 AWG integrated ESD drain wire to prevent ESD attacks and damage.It is rated to provide optimal performance on Gigabit Ethernet networks. TOUGHCable CARRIER is a Category 6, outdoor, carrier-class shielded cable that features an integrated ESD drain wire, anti-crosstalk divider, and secondary shielding. You can also view status information for each port: Operation mode (switching, mirroring, or aggregate) per port.You can access any managed UniFi Switch through the UniFi Controller to configure a variety of features: Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts. Multi-Site ManagementĪ single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. You can download it from at no extra charge – there is no separate software, licensing, or support fee. RJ45 Data Ports: PoE, Speed/Link/Activityĭesigned for convenient management, the UniFi Controller software allows admins to configure and monitor the UniFi Switch and other UniFi devices using a graphical user interface. (1) RJ45 Serial Port (Reserved for Future Use), Ethernet In/Out Band Each 48-port model adds two SFP+ ports for high-capacity uplinks of up to 10 Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.Ĥ85.04 x 44.45 x 285.6 mm (19.1 x 1.75 x 11.24") Each UniFi Switch model includes two SFP ports for uplinks of up to 1 Gbps. The UniFi Switch provides fiber connectivity options for easy expansion of your networks. For 24V passive PoE devices, manually enable 24V passive PoE using the UniFi Controller software. By default, the UniFi Switch automatically detects 802.3af/at devices so they automatically receive PoE. The UniFi Switch models are available with 8, 16, 24, or 48 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at or configurable 24V passive PoE to simplify your infrastructure. The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Supports POE+ IEEE 802.3at/af and 24V Passive PoE.(1) Serial console port (reserved for future use).UniFi Protect G3 Flex Indoor/Outdoor PoE Camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |